Product Overview
Cost effective centralized power distribution with remote management
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804PS provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices.
For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.
Easy Cabling installation
With data and power over Ethernet from one unit, the FSD-804PS shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of the key feature – energy saving. With more efficient switching power supply, the efficiency of the FSD-804PS would be much better than four linear power adapters in a long run.
Providing 4 PoE interfaces, the FSD-804PS is ideal for small business and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.
Friendly / Simple Web Management Interface
The Web smart functions make it easy to survey and control the PoE power provision to the devices by the Web interface. Basic switching functions such as VLAN, Bandwidth Control, Storm Control and QoS are available for network management.
The smart functions make it easy to survey and control the PoE power provision to the devices by the Web and Console interface. Basic switching functions such as VLAN, Trunk, QoS are available for network management.
Specifications
| Model |
FSD-804PS |
| Hardware Specification |
| Network Connector |
8-Port RJ-45 for 10/100Base-TX |
| PoE Inject Port |
4-Port with PoE injector function, Port-1 to Port-4 |
| LED Display |
One power
1-4 port PoE in-use, LNK / ACT
1-8 port LNK / ACT
|
| Switch Architecture |
Store and Forward switch architecture |
| Switch Fabric |
1.6Gbps |
| MAC Address |
1K MAC address table with Auto learning function |
| Throughput |
1.19Mbps |
| Power |
AC 100~240V, 50/60Hz, |
| Power Consumption |
Max. 65 watts / 221 BTU |
| Dimension (W x D x H) |
217 x 135 x 43 mm |
| Weight |
1.0 kg |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type |
End-Span |
| PoE Power Output |
Per Port 48V DC, 350mA . Max. 15.4 watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
60 watts |
| Layer 2 Function |
| Management |
Web management, SNMP Trap |
| VLAN |
Port-Based VLAN and IEEE 802.1Q Tag-Based VLAN, up to 16 VLAN groups |
| QoS |
2 priority queues for three type of Class of Service
• Port-Based
• IEEE 802.1p priority tag
• TCP / IP header's DSCP classifier
Weighted Round Robin queue scheduling
|
| Bandwidth Control |
Inbound Rate Limit and Outbound Traffic shaping |
| Storm Control |
Disable, 12.5%, 25%, 50%, 62.5% 4 levels |
| Standard Conformance |
| EMI Safety |
FCC Class A, CE |
| Operating environment |
0~40 degree C, 10%~95%RH |
| Storage environment |
-40 ~70 degree C, 95% RH |
| Operating Humidity |
5% to 90% , relative humidity, non-condensing |
| Storage Humidity |
5% to 90% , relative humidity, non-condensing |
| Standard Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging |
